Sharaxaada Alaabta
● Qaab dhismeedka mashiinkani waa mid is haysta, xawaare sare leh, xasiloon iyo badbaadinta tamarta, ma aha oo kaliya inuu daboolo baahiyaha wax soo saarka degdega ah, laakiin sidoo kale waa sahlan tahay in la shaqeeyo, wax soo saarka si toos ah otomaatig ah.
● Nidaamka madaxa dhimanaya: iyadoo la isticmaalayo quudinta dhexe iyo nooca xudunta u ah nooca qulqulka kaabaya, nooca dhumucda gidaarka embriyaha, midabka labbiska ayaa si dhakhso ah isu beddela, laga bilaabo hal lakab ilaa saddex lakab si loo daboolo qoysaska macaamiisha leh baahiyo kala duwan.
● Nidaamka xakamaynta: xakamaynta ficilka mashiinka iyadoo la adeegsanayo mashiinka mashiinka-mashiinka PLC, soo bandhig shaqada kormeerka wakhtiga dhabta ah ee dhaqdhaqaaqa farsamada, waxay soo bandhigi kartaa luqado kala duwan, sida qoraalka, Ingiriisiga, iwm., si loo gaaro nidaamka hawlo badan iyo caqli badan.
● Nidaamka Extrusion: Isticmaalka mootada xawaaraha doorsoomayaasha isbedbedelka ah iyo yareeyaha qallafsan, naqshadeynta furaha kaliya ma buuxin karto wax-soosaarka sare, sidoo kale waxay xaqiijin kartaa balaastiig isku mid ah.
● Nidaamka isku dhejinta: hal, laba wareeg + hage toosan oo qumman + gidaar weyn oo qaabaysan, mashiinku aad ayuu u deggan yahay.
Tilmaamid
Qalab | PE, PP, EVA, ABS, PS… | PE, PP, EVA, ABS, PS… | |
Awoodda weelka ugu badan (L) | 5 | 10 | |
Tirada dhimashada (La dajiyay) | 1,2,3,4,6 | 1,2,3,4,6 | |
Soo-saarka (wareegga qallalan) (pc/saacaddii) | 700*2 | 650*2 | |
Cabirka Mashiinka (LxWxH) (M) | 4000*2000*2200 | 4200*2200*2200 | |
Wadarta miisaanka (Tan) | 4.5T | 5T | |
Unugga isku dhejinta | |||
Xooga isku dhejinta (KN) | 65 | 68 | |
Istaroogga furitaanka Platen (MM) | 170-520 | 170-520 | |
Cabbirka Platen-ka(WxH) (MM) | 350*400 | 350*400 | |
Cabirka ugu badan ee caaryada (WxH) (MM) | 380*400 | 380*400 | |
Dhumucda caaryada (MM) | 175-320 | 175-320 | |
Unug soo saara | |||
Dhexroorka furka (MM) | 75 | 80 | |
Isku dhufashada L/D (L/D) | 25 | 25 | |
Awood dhalaalid (KG/HR) | 80 | 120 | |
Tirada aagga kululaynta (KW) | 20 | 24 | |
Korontada kululaynta hawada (aagga) | 4 | 4 | |
Awood wadista dibadda (KW) | 15 (18.5) | 18.5 (22) | |
Madaxa dhiman | |||
Tirada aagga kululaynta (Aaga) | 2-5 | 2-5 | |
Awoodda kuleyliyaha dhinta (KW) | 8 | 8 | |
Masaafada dhexe ee laba-dhimashada (MM) | MM | 130 | 160 |
Masaafada dhexe ee tri-die (MM) | MM | 100 | 100 |
Masaafada dhexe ee tetra-die (MM) | MM | 60 | 60 |
Masaafada dhexe ee lix-dhiman (MM) | MM | 60 | 60 |
Dhexroorka ugu badan ee dhinta-pin (MM) | MM | 200 | 280 |
Awood | |||
Wadista ugu badan (KW) | KW | 24 | 30 |
Wadarta awooda (KW) | KW | 48 | 62 |
Awoodda taageere ee isbiirtada (KW) | KW | 3.6 | 3.6 |
Cadaadiska hawada (Mpa) | Mpa | 0.6 | 0.6 |
Isticmaalka hawada (m³/daqaddii) | m³/min | 0.5 | 0.5 |
Celceliska isticmaalka tamarta (KW) | KW | 18 | 22 |